air trainer supreme Rp.700.000
gw masih nyimpen puma mtv raps for wmn, cortez for wmn, lot of air max & dunk, masih nego get ur shooz on as fast as u can... CONTACT ME: pisangkg@live.com (LIMITED STOCK)!!!
RWC
fatmawati
near high scope
antasari,?????shelter
@ d'nuts kemang
pisang, pong, mos, wes.
nike air 1 chino flamingo pink: 600.000rups
nike sb dunk low tweed: 600.000rups size: 40,42
nike sb dunk low 720 dgree: SOLD OUT
air max light: 600.000rups size:40,44, 45
Close-up off the "no graffiti" warning sign near the corner street in chinatown/lower east side.
The night writer extends the functionality of LED throwies by allowing a writer to catch a tag in lights. It�s cheap, easy to make and writes 12-inch glowing letters 25-feet in the air on any iron or steel surface�if you stand on a turned over garbage can.
Materials:
1/2-inch, 3/16-inch and 1/8-inch foam core, preferably black
5-minute epoxy
Clay
Paint Edger attachment
15-foot telescoping pole
A few hundred LED throwies
Shrink Tube or electrical tape
Tools:
An exacto-knife
T-square/ruler
Step 1:
Cut a 10-inch wide strip of 1/2-inch and 3/16-inch foam core. The length of the strips will be determined by what you want to write. For each letter add 3.75-inches in length. Cut both pieces of foam core the same length. Now graph out a 1.25-inch square grid on the 1/2-inch foam core. Make a 1/2-inch diameter circle at the intersections and cut a hole in the foam core using short cuts tangent to the circle (Fig 1).
Step 2:
Once you have cut all the holes into your 1/2-inch foam core, use the epoxy to glue the 1/2-inch and 3/16-inch foam core strips together. Use the epoxy the fix the paint edger attachment on the back of the night writer (Fig. 2a). Cut 1-inch wide strips of the 3/16-inch foam core about 1-foot in length, and cut 1/2-inch wide strips of the 1/8-inch foam core 1-foot in length. Epoxy these strips together and then epoxy them on the front of the night writer with the 3/16-inch foam core side down (Fig. 2b). These stand-offs are the secret ingredient. Once the epoxy has set-up (about 5-7 minutes), you can screw the painter attachment onto the telescoping pole and get ready to load the night writer (Fig. 2c).
Step 3:
Now make enough LED throwies to catch your tag. You can learn how to make throwies from this site. Modify the original throwie design by adding shrink tube or electrical tape to the LED leads. You can use a lighter or hair-dryer to shrink the shrink tube. On average it takes about 50 throwies to write a four-letter word (Fig 3).
Step 4:
First bend the LED on your throwie so it is pointing perpendicular to and opposite the face of the throwie with the magnet. Add a small ball of clay to the throwie face opposite the magnet (Fig. 4a). The type of clay is called #2 medium Roma Plastilina (Fig. 4a). Now, you can load your word into the night writer. Remember you have to put the text in the night writer so that it is both reversed and mirrored. You can use this javascript application, made by Lonely Guy, to see what your word should look like loaded correctly into the night writer.
Step 5:
Do your thang!
Notes from our experience:the clay freezes in the NYC winter, it�s hard to conceal a 10-foot pole and the NYPD vans are ferromagnetic.
Check out the second LED throwies campaign to see more video of the night writer in action.
“This is fantastic - I’ve got a laser pointer! … Holy mackerel … ah man, that’s terrific!”
– Donald Rumsfeld
Defense contractors say that within the next 10 years they’ll have a solid state laser mounted on a Hummer that can put a hole in sheet of metal from several miles away. Well Dutch graffiti writers can pretty much do that now with this Hymermobil rocking a GRL L.A.S.E.R. Tagging System.
Find out from Agent Watson how this big fucking laser works and download the open source code (built in C++ using Open Frameworks).
When the Pentagon finally does get those hand-held lasers I know a few writers in Holland who will be the first to rack them: F. Lady, BIC, Dask, Walk, NW, WLC (Berlin), Oles, Lastplak, Baschz, Evas, El Pussycat, EVK, Losers, TM, Curry, Ros, Raid, Guilty, LRK, VEV, GPS and ERAS. Thanks to everyone and all our love to Rotterdam (bring an umbrella).
A production of the GRL, Agent Watson, Bennett4Senate, and Huib Van Der Werf. This Weapon of Mass Defacement brought to you by the rouge nation of the Netherlands and the Atelier Rijksbouwmeester.
